This is a good running January 1975 360 I have a video of it running. The engine doesn't blow smoke, has very good oil pressure and good compression. It had a low of 120PSI and a high of 135psi, which for a 41 year old stock engine is great. There is a good chance that the compressions will even out a little more when the engine is given a good run. I imported this engine from the USA I have pulled the sump off and it looks nice and clean inside I removed one main, and one big end cap to check the bearings and crank. The caps were torqued to factory spec and the video was taken after the crank was inspected The bearings are still the factory fitted originals and the two we removed are still in very nice condition with no copper showing. This engine looks to be stock standard and never rebuilt. I fitted the Offenhauser alloy 4 barrel intake because it had a cast iron 2 barrel It comes with a new electronic distributor and leads, alternator, pullies and engine mounts The Holley carby, starter motor, coil, torque convertor and transmission case are NOT included
