liquid intelligence 238 cooling system desludging additive

Oil sludge in the radiator?

Liquid Intelligence 238 Cooling Systems Oil Sludge Remover…cleans oily cooling systems back to new, without disassembly. Guaranteed.

Mechanics say that it’s almost impossible to get a cooling system totally clean, after this has happened.

Even when they have been flushing for days using very strong corrosive cleaners, there is still lots of oily gunk left behind.

Liquid Intelligence has formulated a quicker, simpler, more complete method of cleaning sludge from cooling systems.

We found that by using a chemical reaction we could convert that oily sludge into a water soluble soap based compound that could be simply flushed away leaving a totally clean cooling system.

Liquid Intelligence 238 Cooling System De-sludging Additive
The most common visual symptom of a leak from a head gasket, oil or transmission cooler that has been going on for a while is a thick milky sludge in the coolant. In the early stages of a leak, there may just be an oily sheen on top of the coolant. But if these symptom go unnoticed, which they quite often do, then the oil will continue to build up into a thick sludge, causing the vehicle to eventually overheat.

Of course the damage that caused the problem first needs to be repaired, and then the oil/coolant sludge removed from the cooling system. Flushing the sludge from the cooling system is not easily done, in fact it’s normally a very difficult and time consuming task even for a professional. Most attempts at removing this sludge have included the use of strong detergents, and even solvent or caustic based degreasers, plus all sorts of general purpose cleaners and home remedies. But nothing has ever really worked at removing this thick gunky sludge from cooling system.

The main reason is that engine coolant channels, radiators, hoses and heater matrixes get totally blocked up with high surface tension greasy sludge, that just won’t shift using traditional cleaning chemicals and methods. In fact it’s quite common for a mechanic to have flushed a cooling system for days with very strong acid or alkaline based cleaners and still not get all the gunk out. And there is always good chance that those harsh cleaners will corroded and do further damage to the cooling system.

Liquid Intelligence 238 removes emulsified oil sludge from radiator flutes, water jackets and heater matrix units following cylinder head gasket, or oil cooler failure. The Liquid Intelligence 238 treatment has uniquely different emulsification properties when compared to detergents and degreasers. It uses an innovative pH neutral dispersion method to break even thickest water/oil emulsion sludge and convert it into a water soluble soap based compound… and that then will allow the converted sludge soap to be simply flushed from the cooling system using a normal garden hose… leaving the cooling system squeaky clean and oil free.

And this is why we can guarantee liquid intelligence 238 will work for you…

• One… is that it was built to a standard, and not to a price.
• Two….that it has 1200 times greater emulsifying levels – and ten times the published concentration levels of any competitor product.
• Three….that our testing has conclusively proved that we can always guarantee that it works… as advertised.

Liquid Intelligence 238 Cooling Systems Oil Sludge Remover removes oil sludge from cooling systems following…

• Cylinder head gasket failure.
• Oil cooler failure.
• Vintage car water pump grease sludge build up.

Liquid Intelligence 238:

• Cleans oily cooling systems back to new
• Removes emulsified OIL SLUDGE from radiator flutes, water jackets and heater matrix units following cylinder head gasket, or oil cooler failure…without disassembly.
• Completely dissolves oil sludge from cooling systems, allowing it to be flushed away following cylinder head gasket or oil cooler failure.
• Completely dissolves water pump grease sludge build up from cooling systems, allowing it to be flushed away.
• Dissolves hard to move emulsified sludge blockages from radiator and heater matrix flutes.
• Also can be used to remove oily residue left from combustion gas see page in diesel engine cooling systems.
• Will not damage metal, plastic or rubber.
• Works in conjunction with work shop oily water separators.

How Does It Work?
Liquid Intelligence 238 has the following properties:

• Non Corrosive which means it will not harm any of the metals used in cooling systems.
• Biodegradable which means its formula is extremely efficient at removing oil and grease sludge deposits from the internal surfaces of automotive cooling systems.
• Quick Breaking formulation emulsifies the oil sludge by separating the oil molecules and decreasing their size allowing them to be dispersed in water and flushed away
• 100% Concentrated biodegradable depressant additive with an enzyme catalysts booster.
• Works in all types of engine cooling systems including passenger vehicles, trucks, earth moving plant, mining equipment, farm vehicles, forklifts, marine engines, construction equipment and more.

It really does do exactly what it says like no other product can.

Two year money back satisfaction guarantee.

Instant phone advice - this product comes with a technician on tap.

PRICING
$110.24 for a one litre can (treats up to 20 litres of radiator coolant)

$220.48 buy two cans get one free - limited time only

$440.96 buy four cans get two free - limited time only

$661.44 buy six cans get three free - limited time only

For more info visit - https://liquidintelligence.com.au/products/cooling-systems-oil-sludge-remover#buy